H07V-K 2500V Fine Wire Stranded Single Core Harmonised Cable Non-Sheathed PVC Insulated Electrical Wire
CABLE CONSTRUCTION
| Conductor | Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5 |
| Insulation | Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC60227-3s |
TECHNICAL DATA
| PVC single cores |
to DIN VDE 0285 – 525 – 2 – 31 /DIN EN 50525 – 2 – 31 and IEC 60227 – 3 |
| Temperature range | flexing – 5°C to +70°C fixed installation – 30°C to + 80°C |
| Nominal voltage | 450/750 V |
| Test voltage | 2500 V |
| Insulation resistance | min . 10 MΩ x km |
| Minimum bending radius | fixed installation core Ø≤ 8 mm: 4x core Ø |
core Ø > 8-12 mm: 5x core Ø core Ø > 12 mm: 6x core Ø
APPLICATION
These single cores are suitable for laying in tubes, under and surface mounting of plasters and also in closed installation conduits. These are not allowed to install for direct laying on cable trays, channels or tanks. These types are permitted for the inner wiring of equipment, distributor and switchboards and also for protective laying to the lighting with a nominal voltage up to 1000 V alternating current or up to 750 V direct current against earth.
H07V-K/ (H)07V-K DIMENSION
|
Cross section area |
Outer diameter approx. |
Copper weight |
|
mm² |
mm |
kg / km |
|
1.5 |
2.8 – 3.4 |
14.4 |
|
2.5 |
3.4 – 4.1 |
24.0 |
|
4 |
3.9 – 4.8 |
38.0 |
|
6 |
4.4 – 5.3 |
58.0 |
Write your message here and send it to us
