DeviceNet Cable Combo Type by Rockwell Automation (Allen-Bradley)
Constructions
1. Conductor: Stranded Tinned Copper Wire
2. Insulation: PVC, S-PE, S-FPE
3. Identification:
● Data: White, Blue
● Power: Red, Black
4. Cabling: Twisted Pair Laying-up
5. Screen:
● Aluminum/Polyester Tape
● Tinned Copper Wire Braided (60%)
6. Sheath: PVC/LSZH
7. Sheath: Violet/Grey/Yellow
Reference Standards
BS EN/IEC 61158
BS EN 60228
BS EN 50290
RoHS Directives
IEC60332-1
Installation Temperature: Above 0ºC
Operating Temperature: -15ºC ~ 70ºC
Minimum Bending Radius: 8 x overall diameter
Electrical Performance
| Working Voltage |
300V |
| Test Voltage |
1.5KV |
| Characteristic Impedance |
120 Ω ± 10 Ω @ 1MHz |
| Conductor DCR |
92.0 Ω/km (Max. @ 20°C) for 24AWG |
|
57.0 Ω/km (Max. @ 20°C) for 22AWG |
|
|
23.20 Ω/km (Max. @ 20°C) for 18AWG |
|
|
11.30 Ω/km (Max. @ 20°C) for 15AWG |
|
| Insulation Resistance |
500 MΩhms/km (Min.) |
| Mutual Capacitance |
40 nF/Km |
|
Part No. |
No. of Cores |
Conductor |
Insulation |
Sheath |
Screen |
Overall |
|
AP3084A |
1x2x22AWG |
7/0.20 |
0.5 |
1.0 |
AL-Foil |
7.0 |
|
7/0.25 |
0.5 |
|||||
|
AP3082A |
1x2x15AWG |
19/0.25 |
0.6 |
3 |
AL-Foil |
12.2 |
|
37/0.25 |
0.6 |
|||||
|
AP7895A |
1x2x18AWG |
19/0.25 |
0.6 |
1.2 |
AL-Foil |
9.8 |
|
19/0.20 |
0.6 |
DeviceNet is a network protocol used in the automation industry to interconnect control devices for data exchange. DeviceNet was originally developed by American company Allen-Bradley (now owned by Rockwell Automation). It is an application layer protocol on top of the CAN (Controller Area Network) technology, developed by Bosch. DeviceNet, compliance by ODVA, adapts the technology from the CIP (Common Industrial Protocol) and takes advantage of CAN, making it low-cost and robust compared to the traditional RS-485 based protocols.